Notice the half ball on the end of
the support rod is grooved down
one side. This Keyway fits over the
small keyway pin on the inside of
the mounting bracket and keeps
the ceiling fan from spinning on the
mounting bracket.
6
Using your step ladder, lift the fan
and place the half ball in the center
of the mounting bracket with the
keyway pin inserted into the
keyway on the ball. Turn the fan
left and right slightly to make sure
it is seated on the bracket with the
keyway pin in the keyway.
HANGING THE FAN BODY
1.
2.
Trim the lead wires, leaving
about six inches of each wire
extending from the support
rod
.
3.
Mounting Bracket
Keyway Pin
Ball Hanger
Support Rod
Mounting
Bracket
Keyway Pin
Ball Hanger
Support Rod
Ground Wire
Support Rod
Ball Hanger