Remove clamp pin (1) and cross pin
(2) from downrod (3).
5
Loosen set screws in downrod coupling. Insert down rod through the canopy
and coupling cover (4) as shown above. Insert motor wires through the down
rod and insert the down rod into the down rod coupling. Make sure to align the
hole in the downrod with the hole in the downrod coupling. Install cross pin (1)
removed in step 6 through coupling and downrod. Insert keeper pin (2) into
cross pin until it snaps into place. Tighten set screws (3) in coupling. Slide
coupling cover (4) and canopy onto the downrod above the coupling cover.
DOWNROD PREPARATION
1.
2.
3.
1
2
3
1
4
3
2