15
ERROR CODES
The display will also show any error codes if an issue or
malfunction is detected.
AS
Humidity sensor error. If this occurs, please try unplugging
your appliance, wait 30 seconds and then re-plug your
appliance into power. If the error continues to occur,
please contact our service team.
ES
Temperature sensor error. If this occurs, please try
unplugging your appliance, wait 30 seconds and then
re-plug your appliance into power. If the error continues
to occur, please contact our service team.
P1
Unit is defrosting. Allow the appliance time to
automatically defrost. This error code will clear after the
appliance has finished defrosting.
P2
Water storage tank is full or has not been fitted correctly.
Remove the water tank, empty and replace into the
correct position. The error code should clear.
E3
Unit malfunction. If this occurs, please try unplugging
your appliance, wait 30 seconds and then re-plug your
appliance into power. If the error continues to occur,
please contact our service team.
EC
Refrigerant leak detected. If the appliance detects a
refrigerant leak, please disconnect from power, carefully
remove from your home and contact our after sales team
for assistance.
OTHER FEATURES
Water tank full (FULL)
This indicator light will illuminate when the water tank is
full and ready to be emptied. This light will also illuminate
when the water tank has not been fitted correctly.
Automatic Power Off
Your dehumidifier will automatically power off when the
water tank is full or when the tank has not been correctly
fitted. When the set humidity level has been achieved, the
appliance will automatically power off. For some models,
the fan motor will continue to operate.
Auto Defrost
When frost builds up on the evaporator coils, the
compressor will cycle off and the fan will continue to
operate until the coils defrost. Note: During this process
the appliance may make gurgling sounds which is
completely normal.
Power protection
To maximise the life of the appliance and to protect
it’s system, after the appliance has been stopped it
cannot be restarted for a 3 minute period. Operation will
automatically start after the 3 minutes has expired.
Smart Dehumidifier Mode (some models)
During Smart Dehumidifier mode, the appliance will
automatically control the room humidity to a comfortable
45%-55% range, according to the room temperature. Any
humidity setting will be disregarded during this function’s
operation.
Auto Restart
If the appliance unexpectedly loses power (i.e. a power
black-out) it will automatically restart with the previous
settings applied once power resumes.
