2
© 2012 Observint Technologies, Inc. All rights reserved.
2. Insert the software CD into the optical drive and allow it to initialize (autorun). The screen shown
below should open.
3. If Java is not loaded on your computer, click the
Download Java
button on the IPCorder window,
then follow the on-screen instructions to install it.
4. On the IPCorder window, click the
Start Discover
button.
5. In the IPCorder discover window, click the
Discover
button in the lower-right corner and wait until
your NVR is found. Verify that the NVR discovered is your target NVR by the MAC address; the MAC
address of the NVR hardware is shown on a label on the underside of the unit. If your NVR was not
found during the scan, click the
Discover
button again.
NVR device discovered
Step 3. Using the Configuration Guide
1. In the Discover window, double-click the entry for your NVR to access the unit through an internet
browser.
In the login window, enter the default administrator Username and Password (
admin
and
admin
),
then click
Login In
. Passwords are case sensitive.
2. In the Configuration Guide - Welcome window, click the button next to “
English
” open the drop-
down list. Select your preferred language, then click
Apply and Continue
.
3. In the Configuration Guide - Change default administrator password window, enter your new
password in both fields, then click
Apply and Continue
. It is strongly recommended that you
change the password to one with high security strength.
4. In the Configuration Guide - User preferences window, select the options appropriate for installation,
then click
Apply and Continue
.
5. In the Configuration Guide - Date and Time window, select the options appropriate for location,
including the
Time Zone
Area
and
City
, then click
Apply and Continue
. Note that an option is
provided to synchronize the NVR with your computer.
Note that an option is provided to synchronize the NVR with your computer. If you change the clock
time, the NVR will restart, then open the next configuration screen.
6. In the Configuration Guide - Network configuration window, enter the network and domain options
you prefer. In the Domain Settings section, you can specify a Hostname for your NVR. Click
Apply
and Continue
.
