11
3-‐in-‐1 Handlebar
The Solowheel Scorpion has a 3-‐in-‐1 handlebar that acts as a carrying handle, a walking handle and a stand.
Carrying Handle/Riding Position
The Solowheel handle is in carrying/riding position when it’s folded down and locked in place. Always ride with the handle in this
position.
•
Extending the Handle
–
Slide the latch located near the stand to unlock the handle. Lift the handle until it clicks into place. The
button at the top of the case near the handle joint will pop out, indicating that the handle is locked in the walking position.
•
Retracting the Handle
–
Hold down the button near the handle joint (the button that popped out when you extended the
handle) and fold the handle downward until the latch clicks into place.
Walking Position
While the handle is in walking position you can use it to push your Scorpion over the ground. The Scorpion can be pushed with the
power on or off. Keeping the power on will make it easier to control the Scorpion while you’re pushing it. Standing still with the power
on will use some battery power. Walking with the Scorpion can charge the battery, even when the unit is turned off.
CAUTION:
Do not attempt to ride the Scorpion while the handle is extended.
Stand
The stand allows your Scorpion to stand upright on its own when it’s powered off. Tilt the Scorpion backward so that it rests on the
stand.
IMPORTANT:
When using the stand, be sure the unit is balanced securely on the ground before you let go.
