USER MANUAL
03
SOLOSHOT.COM
1
Dock the Tag, with buttons facing up,
into the Accessory/Charging Port on
the front of the Base.
Attach the Tag to the Base by first
inserting from the top, as depicted in
the graphic below.
2
Docking the Camera
Dock the OpticX Camera to the Base by
guiding it down onto the tilt drum from
above, and then pushing it forward until
it securely clicks into place.
3
Powering On
To power on Base, press and hold the
Power Button for 3 seconds.
To power on Tag, press the Power
Button.
Assembly
Charging the Base and Tag
Getting Started
Docking the Tag
!
3
!
IMPORTANT
Micro SD Card
Insert an approved Micro SD Card (not
includede into the side of the OpticX
Camera. You will hear a click when fully
inserted.
Your SD card will be completely erased.
Make sure to save any content that you
don’t want erased!
Visit support.soloshot.com for a list of
compatible SD cards.
2
Fully charge the Base and Tag prior to
use. This will take about 4 hours.
Charging time varies based on USB
wall adapter rating.
Charging Time
i
INFO
Only the Base & Tag contain batteries
and must be recharged. The Camera
can, but does not need to be connected.
1
Insert the Mini USB Charging Cord into
a USB outlet adapter (not included) and
plug it into the Base.
1.5A to 2.1A outlet adapter is required.
(most tablet charger adapters)
Charging Cord & Adapter
The SOLOSHOT3 must be in an upright
position during device update &
registration, and during general use.
Prevent SOLOSHOT3 from tipping over
when the Camera is connected.
Connect the Base to your Tripod.
(See page 4)
IMPORTANT
