1
3
2
Set Start Point
Set End Point
Start MTL
1
Ov Open Settings
Setting MTL Parameters
Motion Time-Lapse
Motion Time Lapse is the ability to
capture a series of photos at while
moving at predetermined intervals.
From the Home Screen, Tap the Motion
Time-Lapse Icon to open the app.
Tap the Settings Panel.
i
Settings
Interval
The number of seconds that will elapse
between each photo.
Interval Parameters:
3s, 5s, 10s, 30s, 60s
Number of Frames
The number of photos that will be
taken in the session.
Number of Frames Parameters:
10, 100, 300, 450, 900, 1800
Elapsed Time
The total time it takes to perform the
motion time lapse. It is calculated by
multiplying the interval by number of
frames, and is displayed in total
minutes.
Setting Start and End Points
Use the arrows to find a START point
and adjust the field of view (degree of
zoom).
Tap SET.
Use the arrows to select the END point
(zoom is disabled at this stage).
Tap SET.
Tap the Time-Lapse Icon to begin.
USER MANUAL
19
SOLOSHOT.COM
2
Modify Settings
Modify Interval and Number of Frames
to create your desired result. Elapsed
Time will automatically calculate.
!
TIP
Use a shorter interval [1-3 seconds]
when capturing faster moving objects.
Use a longer interval [5 seconds or
more] when capturing slower moving
objects
i
Cancelling MTL
The MTL can be cancelled at any time
by tapping on the Stop Button.
You can save the incomplete MTL onto
the SD card, or discard all photos taken
during the session.
