Solo TOC-1, Руководство пользователя

Страница: 87 / 144

7-3
Maintenance Safety Information
Maintenance Safety Information
General Maintenance Safety Information
For your personal safety, do not attempt
inspections or repairs not fully described
in this manual. Contact your ElectraMeccanica Authorized
Service Provider for service if you cannot determine the cause
of a problem, or if the inspection or repair exceeds your
abilities or resources.
Never perform an inspection or repair
with the key switch in the ON position,
unless otherwise specified. See “Key Switch”, page 4-6 .
Never perform an inspection or repair
with the Drive Mode Selector in D (Drive)
or R (Reverse). See “Drive Mode Selector”, page 4-7 .
High-Voltage Safety Information
Exposure to high voltage can cause shock,
burns, and even death.
Never try to do your own service on
high-voltage components. You risk serious
injury or death and damage to your vehicle if you attempt to
do your own service work. Service and repair of these
high-voltage components should only be performed by a
trained service technician with the proper knowledge and
tools.
Damage to the high-voltage battery or
high-voltage system can create a risk of
electric shock, overheating, or fire.
High-voltage components are identified by labels.
These labels may include the symbol for risk of
electric shock (illustrated here). Do not remove,
open, take apart, or modify these components. See
“High-Voltage Components”, page 5-1 .
High-voltage cable or wiring has orange covering or labels. Do
not probe, tamper with, cut, or modify high-voltage cables or
wiring.
If the high-voltage electrical system senses a problem, it may
shut down the system. When this occurs, the high-voltage
battery is disconnected and the vehicle will not operate. Before
the vehicle can operate again, it must be serviced at an
ElectraMeccanica Authorized Service Provider.
If the vehicle is damaged from a moderate to severe collision,
flood, fire, or other event, the vehicle should be inspected as
soon as possible. Only an ElectraMeccanica Authorized Service
Provider or a trained service technician with the proper
knowledge and tools should inspect, test, or replace the
high-voltage battery.
Note: Any attempt by an unauthorized party to repair, replace,
alter, modify, or tamper with the high-voltage battery will void
the warranty.
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING