Please follow the steps below to connect AC wires:
Step 1
- Disconnect the unit from the battery either by turning off the battery circuit
breaker or removing the battery cables from the battery. Note that
turning the unit off does not disconnect the batteries.
Step 2
- Remove bottom cover and knock off “PV”, “IN” & “OUT” holes.
Step 3
- Thread the AC input wires through “IN” hole of bottom cover and AC
output wires through “OUT” hole, then connect the AC input wires to input
terminal, AC output wires to output terminal & AC GND: GND
(green/yellow), Line (brown or black), and neutral (blue) wires.
Legend
B
Coil Remote Switch
Q
Magneto-Thermal Input Main Switch
T
AC Contactor
N/L2 Neutral/L2
L/L1 L1 Line Input
External
Distribution
Panel
POWERBACK PB3000S
/
POWERBACK PB5000S
WARNING!
All wiring must be performed by a qualified technician.
WARNING!
Operation without a proper grounding connection may
result in electrical shock.
