PES-2403 User Manual > Layout
2017-07-28
Sollae Systems
page 7 of 26
2. Digital input port
This port is used to connect limit switches and cannot be used for other purposes.
An example of connection with limit switches is as follows:
G means ground and all ground pins are connected each other
0, 1, 2 and 3 are the index number of input ports and all of them are pulled up
3. SLAVE ID Switch
A slave ID is used when PHPoC board identifies each smart expansion board. So, each smart
expansion board, which is connected to a PHPoC board, should have a unique slave ID. The slave ID
can be set one of the numbers from 1 to 14 by 4 DIP switches as follows:
