PES-2403 User Manual > How to use > Settings the Initial Position
2017-07-28
Sollae Systems
page 21 of 26
Setting the Initial Position
By connecting a limit switch to the digital input port of the PES-2403, you can set the initial position
in a system that requires initial positioning. The procedure for setting is as follows.
Driving the motor
1.
Drive the stepper motor to the direction of initial position when the system is started.
Stopping the motor
2.
Stop the stepper motor once the limit switch is closed. You can stop the motor automatically
or manually.
stop automatically
stop manually
Setting the Initial Position
3.
When the motor stops, check the current position of the counter referring to
Check Status
and
use it as the initial position.
