CSW-H80 User Manual Ver. 3.0
- 28 -
4.5
Serial Configuration Mode
4.5.1 Configuring Parameters
This is a mode for setting environmental parameters through the serial port. If you
cannot use the WLAN, this mode is only way to configure the parameters. Click the [Read]
button on the [Serial] tab of ezManager after entering this mode.
Refer to the [Serial Management Protocol] document on our website for details.
4.5.2 Revoking Serurity Options
CSW-H80 offers restriction for security like filtering with password or MAC and IP address.
In the serial configuration mode, you can revoke all of these options. When you forget the
password, enter this mode to change or delete it.
4.6
ISP Mode
4.6.1 Upgrading Firmware
ISP mode is for upgrading firmware, implemented via the serial port.