CSE-H25 User
’
s Manual Ver. 1.2
Sollae Systems Co., Ltd.
- 19 -
http://www.sollae.co.kr
Multiple Connection
ezTCP Firewall
Allowed MAC Address, Allowed IP Range,
IP Address, Network Mask,
Apply To ezManager
Serial Port
Serial Port
Serial Type, TTL, Baud Rate, Parity, Data Bits, Stop
Bit, Flow Control, DTR/DSR, TX Interval
TCP/IP
Communication Mode, Peer Address,
Peer Port, Local Port, Event Byte, Timeout,
Data Frame
3.2.4 Matters to be attended to
ezManager can be used when you want to change your device‟s environment variables.
In case of CSE-H25, two interfaces are supported and those are Ethernet and RS232 port.
Using Ethernet Port
For use ezManager through Ethernet, CSE-H25 should be connected with PC on networks.
If they are located at the same network, [Search All], on the [MAC] tap, could be used
with MAC address. If they are connected on Internet, [Read], on the [IP] tap, could be
used.
Using RS232 Port
For use ezManager through RS232, not only the CSE-H25 should be connected to PC
with RS232 cross cable but also has to be operated as serial configuration mode.
3.3
AT command
In ATC mode, the user can set environment variables through the serial port using AT
command.
For more information, See “7. ATC Mode”.
