CIE-H14A User Manual Ver. 1.4
- 16 -
1.5.5
Ethernet Interface
An RJ45 connector is for the network interface of CIE-H14A. You can use a UTP cable. It
automatically senses 10Mbits or 100Mbits Ethernet. It also provides auto MDI/MDIX
function that can automatically sense a 1:1 cable or cross over cable.
Each Ethernet device has its own hardware address (MAC address). CIE-H14A is shipped
to the market with the hardware address set in the factory.
Figure 1-13 RJ45 connector of CIE-H14A
⚫
Status of the system RJ45 LED
Color
LED status
Description
Yellow
Off
10 Mbps
On
100 Mbps
Green
On
Connecting with Ethernet
Off
Not connecting with Ethernet
Blinking
When sending/receiving network data
Table 1-9 LED status on the RJ45
