CIE-H14A User Manual Ver. 1.4
- 13 -
1.5.3
Output Ports
The output ports of CIE-H14A are interfaced to relays (NO : Normal Open) type as shown
below.
Figure 1-10 a circuit of the output port
The operations of an output port are as follows:
value
relay contact
0
OFF (open)
1
ON (short)
Table 1-5 values of the output port
The allowed current of output port according to voltage condition is as follows:
Voltage Condition
Allowed current
DC 28V
5A
Table 1-6 voltage conditions of the output port
Use a (-) shaped screwdriver to connect it with users
’ device
s since the output ports
are interfaced with a 5mm terminal block.
Use a power relay when users' device uses AC or excesses the allowed maximum
current consumption.
