109
n
NOTE TO DETERGENTS
•
Never use scratching or aggressive detergents or solutions to clean the motor
base or the blender jug with lid and blade base – they might scratch the surface.
Only use warm water with mild washing-up liquid and a soft towel.
n
HOW TO REMOVE TOUGH STAINS AND SMELLS
•
Odorous foods like garlic, caraway/coriander or some kinds of vegetables like
carrots can leave a smell or discoloration on the jug or lid.
•
To remove these, fill the jug with warm dishwater and let it sit for a maximum
of 5 minutes. After that, clean the jug by hand with a mild dishwashing liquid
and warm water. After that, carefully rinse with clear water and dry. It is vital
that the jug is stored with an open lid.
•
Put the lid in warm dishwater for a maximum of 5 minutes. After that, clean
it with a mild detergent and warm water. After that, carefully rinse with clear
water and dry.
n
PLEASE NOTE WHEN PREPARING DISHES WITH
LEMON JUICE
•
The juice of citrus fruits can tarnish the blender jug and impair its durability. We
recommend immediately cleaning the blender jug after use in warm dishwater,
carefully rinsing it with clear water and drying it right away. Do not let the
blender jug soak in!
n
STORAGE
•
Store your Solis Ultra X-Press in an upright position, the blender jug should be
placed right next to it. Do not place anything on top of the appliance. To allow
free air circulation, the lid should not be placed on the blender jug.
•
Caution:
Always store the appliance out of the reach of children in a well ven-
tilated room. Direct sunlight should be avoided.
108
s
CARE AND CLEANING
n
BLENDER JUG WITH BLADE BASE, LID AND CAP
For safety reasons, the power plug has to be pulled after every use and before
cleaning the appliance. To prevent the foods from drying around the blades, the
blender jug or lid after preparation, we recommend proceeding as follows after
every use:
•
Rinse the blender jug with blade base, the lid and the cap with water to remove
most of the food remains.
•
Pour 700 ml of warm water into the blender jug, place the lid including the
cap on the jug and place it on the motor base. Plug the power plug in a power
outlet. Engage the Pulse function multiple times. Should the foods persistently
stick on, add a little dishwashing liquid.
After that, rinse the blender jug, the lid and the cap again with warm water or
clean everything in warm dishwater with a soft towel or a bottle brush.
•
Make sure to rinse all dishwashing liquid remains out of the jug with clear water.
•
When the blender jug, lid and cap are all clean, dry everything carefully.
•
Note:
The blender jug is easiest to clean right after use.
•
Caution:
Watch out for the extremely sharp blades! Never touch them with
your bare hand!
n
CLEANING IN THE DISHWASHER
•
The blender jug and the lid as well as the blade base can be cleaned in the
dishwasher in a standard cycle. Please make sure that the lid has been removed
before placing the jug in the dishwasher.
n
CLEANING THE MOTOR BASE
•
Wipe the motor base clean with a slightly wet, soft towel and dry it afterwards.
Remove potential food remains from the power cord.
