5. Operation
5. Operation
.36.
.37.
Calibrate
2015-02-23 19 35
Total
Energy
Power
Parameter
5.6.3 Calibrate
By using our data monitoring hardware, the data on monitoring website can automatically
synchronize with the preset total generating power of inverter.
Warranty or maintenance may result in resetting total generating data, this function allow
the maintenance personnel to amend the total generating data of replacement inverter to
the original one.
Figure 5.27 Calibrate
Figure 5.28 Total
Energy
Adjusting total generating power
2015-02-23 19 35
Total Energy:
E S C
U P
D O W N
E N T
Y E S
=
< E N T >
N O
=
< E S C >
Total
Energy
00000
kWh
5
6
This function is used to select corresponding grid standards.
Please refer to the actual LCD setting for the grid standard options.
Figure 5.25 Select Standard
5.6.1 Select Standard
Settings
Select Standard
2015-02-23 19 35
Y E S
=
< E N T >
N O
=
< E S C >
G59/3
Select Standard:
Press "UP" and "DOWN" to go through the list.
Press "ENT" to check the parameters, press "ENT" again to select the standard.
This function is used to start or stop the generation of the inverter.
Figure 5.26 Set ON/OFF
5.6.2 ON/OFF
Settings
ON
/
OFF
2015-02-23 19 35
ON
OFF
Y E S
=
< E N T >
N O
=
< E S C >
STOP
