SolidRF SR14652002A, Руководство пользователя

Страница: 13 / 32

Step5: Evaluate the Effects
Test Record
13
•
Now that the booster is up‐and‐running, re‐test the signal strength inside your home
at the same locations from Step 3. If the number is higher (dBm reading is closer to
zero) than the original reading, your booster is working.
•
If your signal is not stronger, check the LED lights on the booster and refer to the
“
Trouble Shooting ” on page 17 for detail information.
No Location Record(dBm)
1
2
3
At a distance of 6 feet from the indoor antenna, test the
signal strength without obstruction. If this test result is
15~20db higher than your test result at the outdoor
antenna position, then your system has reached the best
effect.
For example, you test a signal of ‐90dbm at 6 feet away
from the indoor antenna. Your outside antenna position
record is ‐105dbm. So the improvement is:
‐90dbm ‐ (‐105dbm) = 15db
If your results do not reach this range, please go to
“
Trouble Shooting ‐ No Improvement ” on page 24 for
detail information.
How to visually confirm that your installation is effective and correct?
Note1: In daily life, the signal dbm readings of our mobile phones range from ‐70dbm to
‐120dbm. Because it is a negative number, the smaller the number, the greater the
signal strength.
Note2: In the case of no problems with the installation, the strength of the indoor signal
depends entirely on the strength of the outdoor signal.
6 feet
Note: Decibel Gain and Power Amplification may vary depending on the specifics of your
situation. Different building materials and other obstructions in your home will result in
different outcomes.