STEP BY STEP INSTALLATION
Step 1: Mount the booster outside unit
a. Choose right position
•
Find the strongest signal position in the
possible install locations by reading your cell
phone signal bar (
see Find Strongest Signal)
•
Stay away from any big metallic objects
•
100 cm away from any windows
b. Connect the cables as required (
see the
picture below
)
•
The booster outside unit is integrated with
the exterior antenna and the signal amplifier,
ideal to improve system performance.
•
Make sure connectors are well screwed in
c.
Mount the booster outside unit on the mount
pole (
not included
) with U bolt. The outside unit
is recommend to install on the mount pole over
the roof, it would help to provide sufficient
isolation between two antennas.
Installation - Step By Step
How does it works
Step 1: The powerful outside antenna captures
a voice and data signal and transfers it to the
booster.
Step 2: The booster receives the signal,
amplifies it and then rebroadcasts the signal by
the inside antenna.
Step 3: Your mobile devices will get a better
signal, never experiencing dropped calls or slow
data speed.
Supported Carriers
•
AT&T 2G/3G (HSPA+)/4G*
•
Verizon 3G/4G
•
T-Mobile 2G/3G/4G*
•
Sprint 3G/4G
•
US Cellular 3G
•
Metro PCS 3G/4G*
•
Major Canadian Carriers 2G/3G
•
All other carriers using 700MHz/850MHz and
1900 MHz
Coverage Area
Note: Any cell phone booster has a limit of
amplification power. This depends on the
original output power of the closest cell tower.
Power level
at the outdoor antenna location
Coverage Area
(sq. ft.)
Strong (5 bars on the cellphone)
3000
Medium (3~4 bars on the cellphone)
1200
Weak (1~2 bars on the cellphone)
300
Conduct a Test Installation
Conduct a test instillation to ensure correct
product functioning before permanently
installing the booster.
The test instillation will help to determine the
best location for the inner and outer antenna
and additionally the routing cable
