Telescope mast
• Made of aluminum
• Individually adjustable mast height
from 200 cm to 350 cm
• Integrated gliding carriage for a
practical height adjustment of the
sunsail from 0 to 350 cm
• Integrated eyelet for anchoring
mast
1.
Embed the fundament. The chart shows you guidelines for the
size of the fundament. Dig at least 80 cm deep because of
frost protection.
2.
Place a layer of gravel of about 10 cm.
3.
The ground sleeve is already sloped in an inclination of 10°
on the upper side (ground level) and marked with a notch.
4.
Insert the included twist anchor (metal mandrel) into the
bore intended for this use at the lower end of the ground sleeve.
Now place the ground sleeve into the gravel. Thus, the condensation
water and the rain water can drain into the ground.
5.
Position the ground sleeve properly:
a)
the ground sleeve must be positioned so that the notch shows
in the direction of the diagonally opposing attachment points
(mast, wall plate, etc.).
b)
The diagonal upper side already provides the 10° inclination.
Put the spirit level on the upper side of the ground sleeve and
position it horizontally. Beware! Take care of the electricity supply
with Soliday C systems!
6.
Mix concrete according to manufacturer instructions.
Fill in the cement from above into the fundament up to about 20
cm under the ground level.
7.
Compress the cement and let it harden according to manufacturer
instructions.
8.
Place the fundament, possibly an earth- and lawn layer, and cover
the ground sleeve, so that no contamination gets into the ground
sleeve.
Mounting instruction, accessories and advice
INSTRUCTION FOR GROUND FUNDAMENTS
WITH SOLIDAY GROUND SLEEVE
l
l
l
l
l
l
l
l
9
SAIL
LENGTH & WIDTH
DEPTH
– 20 m
2
40 x 40 cm
– 30 m
2
– 60 m
2
50 x 50 cm
80 x 80 cm
80 cm
120 cm
100 cm
1
3
4
5
6
7
1. Mast
2. Locking screw
3. Notch
4. Ground sleeve
5. Concrete
6. Metal mandrel
7. Gravel
1
2
3
1. Spirit level
2. Notch
3. Ground sleeve
Positioning
notch
Locking screw
2