STEP 5 –
MOUNTING OF ADDITIONAL ATTACHMENT POINTS
Additional attachment points can easily be set with masts (te-
lescope mast, aluminum mast, Niro (corrosion-resistant) mast,
galvanized mast, droppole).
The masts can be set in a ground sleeve encased in concrete, bol-
ted in a fundament with a robust ground plate or attached to a wall
with brackets.
The dimensioning of the sunsail masts depends strongly on the lo-
cal occurrence. Will the sunsail be installed on a very windy place
of in an inner courtyard, will it possibly be protected by buildings,
trees or fences, is it on a rooftop terrace or in the middle of a gar-
den and is exposed to wind without protection? In any case the
dimensioning of the mast should be chosen large enough, resp.
additionally anchor the masts.
The sunsail must be removed with strong winds/storm.
For security you can install the security clamp, also see page 14
Depending on local occurrence and wind vulnerability it is recom-
mended to additionally anchor the masts with a tightrope.
Depending on wind vulnerability, angle of inclination and size
of the sunsail, the masts need to be additionally anchored with
strong rope, resp. tightrope if necessary.
l
l
l
l
l
l
Possibilities to stiffen the mounting
Droppole
Stainless steel
Aluminium
Mast anchoring set consisting of:
· Ringbolt … for alu- and niro
(corrosion resistant) masts
· Stainless steel wire rope with
one-sided pressed-on eye terminal
· Wire rope turnbuckle with
stainless steel closed sleeve<<
· 2 pcs wire rope clips and thimble
Further accessories for telescope mast
Aluminum ground sleeve to set in
concrete
Steel ground plate, galvanized
and powder-coated
Stainless steel wall brackets for
attachment on walls (2 pcs)
200 cm
Extendable to 350 m
anchor mast with
a tightrope
1
1
2
3
2
3
Telescope mast
• Made of aluminum
• Individually adjustable mast height
from 200 cm to 350 cm
• Integrated gliding carriage for a
practical height adjustment of the
sunsail from 0 to 350 cm
• Integrated eyelet for anchoring
mast
8