Solidator 1.0, Руководство пользователя

Страница: 7 / 19

7
Initial Commissioning – Machine Setup
Please follow the instructions. If anything is unclear or not behaving as described, please contact tangible
engineering USA Corp. immediately before proceeding.
1. Remove the protective film from the red cover and set the cover aside for now.
2.
Remove the protective film, if any, from the black body of the printer.
3.
Make sure the Power Switch is turned off .
4.
Plug in the power cord to the power unit and wall power socket.
5.
Now the Projector Power LED should light up red. If not check the power cables.