Solidator 1.0, Руководство пользователя

Страница: 13 / 19

13
6. Now, after you have cleaned the object, let it dry a bit.
7. In the meantime, clean the printing platform to make sure it is free of any residue resin or
cured parts. Also inspect the resin container for any cured resin, if cured resin parts are
floating you need to empty and clean it.
IMPORTANT : The printing platform must be extremely clean. There must be no hard resin
parts on the plates anywhere, as if they fall or get in contact with the resin container floor
they can easily destroy the extremely thin film on the container floor.
8. Mount the printing platform back to the Z-Axis. Note the sticker indicating back and front of
the platform.
IMPORTANT : After each print, check the resin container floor and ensure there are no cured resin
parts in the resin. If needed, you should filter the resin using a funnel and a filter grid, pouring the
resin back in the bottle through the funnel and fine paint filter.
Congratulations, you completed your first print, then cleaned it and the Solidator!