Solid State Logic AWS 900+ SE, Руководство пользователя

Страница: 64 / 171

Console Operator’s Guide
4-26
AWS 900+ SE Owner’s Manual
Foldback and Headphone Outputs
The console provides three stereo outputs – Foldback A and B, intended for use in the
studio for headphones or LS playback, plus a stereo headphone feed for control room
use; sockets for this are provided on the knee panel beneath the centre section. The
foldback outputs feed jacks on the centre section connector panel, from where they
may be connected to amplifier inputs.
The master controls for Foldback A and B are provided by two identical sections (see
left – one section only shown).
Each output has a dedicated LEVEL control, CUT , AFL , and six source selector
buttons with associated level controls:
The MIX 1 pot controls the contribution of the Record bus ( REC ) and/or the output of the EXT B ( EXT ) source
selector, to the foldback mix.
The
MIX 2 pot controls the contribution of the Mix bus ( MIX ) and/or the output of the EXT B ( EXT ) source
selector, to the foldback mix.
In addition, Cue Stereo A (
ST A ) and the stereo downmix control room monitor signal ( ST MON ) may be
selected as sources. Foldback B uses Cue Stereo B as its cue source.
Dedicated
F/B A and F/B B talkback buttons are used to add talkback to the foldback outputs.
A small area of the monitor control panel (see left) provides source selection (control
room monitor and foldbacks) and a CUT function for the console’s stereo headphone
output. Two headphone sockets are provided below the motion control panel.
The level of this output is set using the
PHONES button in the ‘MISC LEVELS’ section
of the monitor panel, in conjunction with the main monitor pot.
1
2
3
4
1
2
3
4