Solid State Logic AWS 900+ SE Скачать руководство пользователя страница 165

Страница: 165 / 171

Troubleshooting Chart – Centre section

Problem

Check

Solution

Motion Contro Panel does
not function.

Is the connector labelled IN on the Motion
Control Panel seated correctly?

If no, re-seat as required.

Workstation Panel does not
function.

Is the connector labelled WSINOUT on the
Motion Control Panel seated correctly?

If no, re-seat as required.

Is the connector labelled MONINOUT on
the Monitor Control Panel seated correctly?

If no, re-seat as required.

Monitor Panel does not
function.

Is the connector labelled MONINOUT on
the Motion Control Panel seated correctly?

If no, re-seat as required.

Is the connector labelled MONINOUT on
the Monitor Panel seated correctly?

If no, re-seat as required.

GPIO port does not
function.

Is the connector labelled PL2 on the Motion
Control Panel seated correctly?

If no, re-seat as required.

Is the connector labelled MONINOUT on
the Motion Control Panel seated correctly?

If no, re-seat as required.

Is the connector labelled MONINOUT on
the Monitor Panel seated correctly?

If no, re-seat as required.

Video Display does not
function.

Remove Workstation Panel. Remove
display panel. Is the 30–pin ribbon
connector seated correctly?

If no, re-seat as required.

Is the connector labelled DVIDEO2 on the
CPU card seated correctly?

If no, re-seat as required.

Centre Section meter does
not function.

Is the connector labelled IN on the Meter
Panel seated correctly?

If no, re-seat as required.

Is the connector labelled PL11 on the CPU
seated correctly?

If no, re-seat as required.

AWS 900+ SE Owner’s Manual

A-17

Troubleshooting

Содержание AWS 900+ SE












































































































































































Результаты поиска

Содержание AWS 900+ SE

Отзывы:

Solid State Logic AWS 900+ SE, Руководство пользователя, Страница: 165 / 171

Результаты поиска

Содержание AWS 900+ SE

Отзывы: