GARDEN SHED
– MODERNA2 13 x 10 (1 1/8’’)
10
CORNER REINFORCEMENT STUDS
Fasten the corner plates to the walls to create a pocket and
slide in each stud
through
the top.
OPTIONS
. Use either 3 or 4 corner plates to create the pockets. You can also install
the studs only at the front, the rear ones are not essential, especially when building on
a concrete slab. If you prefer, install the corner studs on the outside!
The corner studs prevent the walls from bowing out in the future. Space out the brackets
to form the pocket and slide/hammer the stud from the top. Leave some room at the
bottom to fit the floorboards and baseboard.
Do not screw the studs until your floor
is done
and the roof is covered as the whole structure will settle from the weight of the
roof. Once all that is done, screw the screws into the sliding slot near the center of the
slot -
do not overtighten
- this allows the structure to expand and contract as the
seasons change. **
Facade may vary **
POSITION
DESIGNATION
DIMENSION (inch)
QUANTITY
25a
Corner Stud
76,77 x 1.57 x 1.57
4
25a
Ø 0,31x0,13x0,13 inch
12-16 units
Ø 0,12x0,12 inch
48 units
Ø M6
16 units
Ø
0,15x1,5 inch
16 units
