PRODUCT MANUAL
NeonArch 24V 90W
Toll Free. 425-582-7533
www.SolidApollo.com
page 5
™
Technical Information
1. Do
- Check the length of the positive and negative wires before soldering to avoid having to cut and re-solder the cables.
Remember, if the cables are not a proper length the connection will not be waterproof sealed.
2. Don’t
- Do not forget to slide the Cable End Cap onto the cable wire first before soldering your connections (refer to Step 4).
Do’s and Don’ts
Before Soldering Cable Wires to NeonArch
Proper Handling and Cutting
1. Do -
Always double-check the cut point you are preparing to cut. Highlight it with a marker if you have to, it’s better
to be safe than sorry.
2. Don’t -
Keep in mind that the NeonArch is top bending (up and down) in the same direction of the light output and
not side bending (left and right). Bending the NeonArch left and right horizontally could split the contacts causing
the unit to fail.
Dimmable :
Minimum Cut :
Available Colors :
Total LEDs :
LEDs per Foot :
Operating Voltage :
Watts per Foot :
Candle Light Warm White 2400K
Super Warm White 2700K
Warm White 3000K
Daylight White 4000K
Red, Green, Blue, & Amber
Natural White 5000K
Candle Light Warm White 2400K
Super Warm White 2700K
Warm White 3000K
Daylight White 4000K
Natural White 5000K
Red, Green, Blue, & Amber
Yes
1.3in (33mm)
1050
64
24V
5.5W
Watts per Spool :
Max Power :
LED Type :
Beam Angle :
Warranty :
Weight :
Size :
IP Rating :
Working Temperature :
90W
90W
SMD 2835
124º
3 Years
1.45lb
L: 16.4ft x W: 0.5in x H: 0.3in
IP67
-10F to 140F
