USER MANUAL
Neon LED Configuration
Neon LED C
onfigur
ation
™
Toll Free: 866.592.3873
Email: [email protected]
www.SolidApollo.com
Page 8
First, the components need to be tested to confirm they work before adding any glue. The Neon LED can only be powered
from one end. If the extra piece of Neon LED needs to be cut follow the rest of this step, otherwise skip to step 2. Find the
cut point you want to add an interconnector to. Cut at the cut point as noted on page 2 titled “Cutting the Neon.”
1
Installing a Joiner:
In this section you will add a joiner to any cut point on the Neon LED.
Joiner:
Used for attaching extra Neon LED where no gaps
are needed
CUT POINT
...continued on next page
Take the prong and line it up to the Neon LED making sure the prong is oriented in the correct direction. Carefully insert
the pointy end of the prong into exposed wire ends. Try to have each prong insert into the center of each exposed wire
end. The prong needs to be inserted as far as possible without using excessive force.
2
insert prong in bottom right wires
Neon on Side
NEON
END
plastic bracket on prong does not
match shape of Neon
CORRECT:
INCORRECT:
prongs insert in
bottom wires
Neon Color on Side