USER MANUAL
Neon LED Configuration
Neon LED C
onfigur
ation
Page 10
Toll Free: 866.592.3873
Email: [email protected]
www.SolidApollo.com
After confirming the lights work,
unplug the Neon LED from the wall outlet.
Carefully pull the power adapter off
the Neon. The prongs are sometimes stuck inside the connector on the power adapter and require a set of tweezers or
tongs to pull the prong out.
5
...continued on next page
The test phase is now complete, and the Neon LED, prong and connector can be assembled for the last time. Take the
prongs and reinsert them into the Neon in the correct orientation. The prong needs to be inserted as far as possible
without using excessive force. Then take the connector end of the power adapter and fill it half way with silicone glue.
6
Take the Neon LED with the prong and re-insert it into the connector of the power adapter, making sure it is inserted in
the correct orientation. Push the Neon and the connector together, until the plastic bracket on the prong touches the
inner wall of the connector on the power adapter.
7
PLASTIC BRACKET HALF WAY IN
PLASTIC BRACKET FULLY IN
