Product Diagram
Operating Instructions
No assembly required.
1)
Remove the heater from the box and place on a firm, level surface. Plug the unit into
a grounded 115V 60Hz power outlet.
2)
Turn the power knob to the desired heat setting. (Timer must be set to ON.)
LOW: heating up to 400W
HIGH: heating up to 800W
LOW SWING: heater will rotate left to right 90,° and heat up to 400W
HIGH SWING: heater will rotate left to right 90,° and heat up to 800W
OFF: heater will stop operating
1)
Built-in Carrying Handle (in back)
2)
Protective Front Grille
3)
Reflection Hood
4)
Base
5)
Timer Knob
6)
Tip-over Safety Switch (on bottom)
7)
Power Knob
8)
Cord Storage Compartment (in back)
3)
To operate the timer, turn the timer knob clockwise to the desired position. The
heater will stop automatically after the set time has expired.
4)
To tilt the adjustable head, grasp the reflection hood and gently tilt it forward or
backwards until you hear a click. The reflection hood can be tilted into 4 positions.
CAUTION: When tilting the adjustment head, the heater must be turned off.
Important Safeguards
1)
Do not install the unit directly under a power outlet.
2)
Do not share the power outlet with other appliances.
3)
Do not use an adapter or extension cord.
4)
Unplug the unit when not in use for a prolonged period.
Maintenance
1)
Unplug the unit and let it cool.
2)
To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You
may use a mild detergent if necessary. CAUTION: Do not let liquid enter the heater.
3)
Do not immerse the heater in water.
4)
Wait until the unit is completely dry before use.
Storage
Store the heater in a cool, dry location when not in use. Preferably, to prevent dust and dirt
build-up, use the old packaging to repack the unit.