SYSTEM LABELS.
-
26
15. System Labels.
INSTALLATION MANUAL SOLENE
®
HOT WATER SYSTEMS
©
2014 UMA Solar
Place these labels on circulation pump (#4), drain
back tank (#5), mixing valve (#10).
Place the labels on manual drains (#6, #7).
The following labels provide the owner with important safety and operating information.
Be sure to cut out the labels below and apply them to the proper system components as described
below. Refer to the DHW Solene system schematic in this manual for reference numbers.
SOLENE CLOSED LOOP OG-300 SYSTEM LABELS
(Whole page will be embossed foil)
Fluid may be discharged at hight temperature
and/or pressure.
Underground piping
Stay clear during any thunderstorm activity.
Underground piping
Stay clear during any thunderstorm activity.
Fluid may be discharged at hight temperature
and/or pressure.
WARNING
WARNING
WARNING
WARNING HOT
WARNING HOT
WARNING HOT
WARNING
No other fluid shall be used that would change
the original classification of this system.
Unauthorized alterations to this system could
result in hazardous health situations.
No other fluid shall be used that would change
the original classification of this system.
Unauthorized alterations to this system could
result in hazardous health situations.
Place these labels on solar feed and solar return lines.
