background image

                                              

                                                                                                     

 

 

 

 

 

 

 

 

1

 

 

 

 
 
 
 
 

SKYWAY

 5000 Series 

 

Base Station 

User’s Guide 

 

For SkyWay 5600 and 5700 

 

 

1. Introduction 

 

Congratulations on your purchase of Solectek’s SKYWAY 5000 Series 

Bridge/Router, a feature rich, best-in-class wireless solution. This User’s Guide 

will describe the operation of your SKYWAY 5000 unit in detail.  

 

S

YSTEM 

F

EATURES

 

 

Field proven OFDM modulation allowing near line-of-sight deployment 

and strong immunity to multi-path. 

 

Data rates from 6 Mbps to 72 Mbps.   

 

High power radio (400mW) and improved radio sensitivity for best in 

class link ranges – over 10 miles with only 1-foot panel antenna. 

 

Power over Ethernet (PoE) for simplified cable routing – only a single 

outdoor CAT5 cable is needed. 

 

Integrated antenna/radio simplifies installation and eliminate s lossy RF 

coax runs. 

 

AES encryption for the ultimate in security and data protection. 

 

Client access control via MAC address filtering. 

 

Intuitive Web based user interface. 

 

P

ACKAGE 

C

ONTENTS

 

 

SKYWAY multipoint base station: 5600 omni or 5700 sectoral. 

 

24VDC Power Supply . 

 

Power over Ethernet (PoE) injector.  

 

Two-axis mast mounting kit. 

 

Ethernet cable weatherproofing gland. 

 

 

 

 

Omni antenna (5600 only). 

 

N-type coax coupler (5600 only). 

 

Coax sealing tape (5600 only). 

 

CD-ROM containing documentation and software utilities. 

 

Registration Card. 

 

Warranty and Compliance Card. 

 

NOTE: CAT5 Ethernet cable is not included in the package. Please contact 

Solectek for information on available UV -protected Ethernet cables for outdoor 

use. 

 

System Requirements 

 

A SkyWay 5000 Series client unit (5100, 5300 or 5500). 

 

Indoor CAT 5 cable – straight cable if connecting to a hub/switch, 

cross-over cable if connecting to a PC. 

 

A computer running TCP/IP over Ethernet for testing of the client in a 

live multipoint wireless network. 

Содержание SKYWAY 5000 Series




















Отзывы: