Dyaco Canada Inc. 2014 [email protected]
10
#41.
M5 × 12L_
Phillips Head Screw (4 pcs)
4.
3
STEP
HARDWARE
STEP 3
1. Connect
the
Computer Cable (80) and
the
Handpulse
Assembly(97)
to the
Console (48) which is on Console
Mast (2) and use
Combination M5 Allen Wrench & Phillips
Head Screw Driver
(43) to tighten
together with
4pcs of M5
× 12L Phillips Head Screws (41).
2. Plug in the HGP Wire Grommet (107)
to
the Console Mast
(2).
3. Cover the Handle Bar(3) with
the
Handle Bar Cover (101)
at the position as show.
4. Use 13mm/15mm open end wrench (79) to install both
Pedals (15) on the crank arms (11-12).
5.
Note: the right pedal is inserted to the crank clockwise and
the left pedal is inserted counterclockwise.
