Customer service: 1-888-707-1880
Dyaco Canada Inc 2021
8
FIGURE 3
- HOW TO ASSEMBLE THE REAR STABILIZER
,
SADDLE AND SADDLE COVER
Step 1:
Remove two pre-mounted screws (C2) and washer (C3) from the slide track (F1).
Step 2:
Remove four pre-mounted screws (D8) from the saddle (D1).
Step 3:
Remove four pre-mounted screws (D2) from the saddle holder (D7).
Step 4:
Use two screws (C2) and a washer (C3) to attach the rear
stabilizer (C1) to the slide track (F1).
Step 5:
Fit the saddle (D1) onto the saddle holder (D7)
using four screws (D8).
Step 6:
Fit the side covers (D3) onto the saddle holder (D7)
using four screws (D2).
FIGURE 4
- HOW TO ASSEMBLE THE SLIDE TRACK
Step 1:
Remove six pre-mounted screws (F6) and washer (F7) from the mainframe (A1).
Step 2:
Push down the locking handle (A74) and allow the shaft base (E1) to rotate upwards. (VIEW A).
Step 3:
Fit the slide track (F1) to the shaft base (E1) using six screws (F6) and washers (F7).
USE TOOL:
M8 M6
USE TOOL: M6
OTHER SIDE
VIEW A
CAUTION
BEWARE OF
PINCH POINTS
F1
A1
C1
D1
F1
D3
