35
Rev. β
5.3.
Lubrication System
Oil forced-feed lubrication system with gear pump with no oil filter.
OIL SPECIFICATIONS
Use oil with 15W40 viscosity (this is an all-season oil for temperatures ranging between -15ºC
and +40ºC) or select the most suitable oil viscosity for the atmospheric temperatures on which the
genset is going to be operated. On the other hand, use oil quality no less than ACEA E5/E3 or API CH-
4/SJ. Other engine oils may affect warranty coverage, cause internal genset components to seize and/or
shorten genset life.
Never mix different types of genset oil. This may adversely affect the lubricating properties of
the genset oil.
Fig. 30. Solé Diesel oil SAE 15W40
5.4.
Exhaust System
STANDARD SYSTEM:
the best dumping result is obtained fitting the 3 typical exhaust mufflers:
the first as water lock avoids the risk of water return into the engine and dumps 50% of noise so it must
be installed; the second reduces a further 20% noise and must be fitted with a gradient towards the out
let in order to avoid water return; the third dumps a further 10% and avoids the risk of external
seawater entrance due to waves.
Содержание 4 GSCH
