28
Fuel line air bubbles bleeding
To achieve the above operation it is necessary acting as follows:
1. Put the decompression device in the position
according the drawing.
2. Push shortly the "START" button in order to feed and
let open the fuel valve.
3. Pull down the Cold Staring Device.
4. Push the fuel lifting pump lever until a certain
resistance is reached.
5. Put again the decompression device in starting
position and make a normal electrical starting attempt.
6. If the result is poor, repeat the operation.
Fig. 26. Automatic Decompression Device
INSPECTION AFTER STARTING UP
LEAKEGE:
Check inside the capsule there is no leakage from the connections of the different
pipes
COOLING SYSTEM:
Check the cooling water is flowing properly from the exhaust outlet,
outboard
When everything is in order, close carefully the capsule and your 4 GSCH is ready for supply trouble less
energy.
4.2. Stopping Genset
1.
UNLOAD THE GENSET.
2.
PUSH THE
STOP
BUTTON
of the Panel Solé Diesel -
SPA 10.
3.
CLOSE THE SEACOCK.
Fig. 27. Panel SPA-10
Содержание 4 GSCH
