SOLDER PEAK SP-1010DR, Руководство пользователя

Страница: 3 / 4

2 / 3
DESCRIPTION
SP-1010DR designed for lead free desoldering especially. The quick heating and strong power are for convenient and clear soldering /
desoldering all types of DIP components.
TECHNICAL DATA
STATION DESOLDER GUN
INPUT VOLTAGE
220-240VAC
VOLTAGE 24V
POWER
CONSUMPION
80W POWER 60W
HEAT UP RATING 130W
MAIN FUSE 3A TEMPERTURE 160
℃
-480
℃
VACUUM PRESSURE 600mm Hg HEATING ELEMENT PTC CERAMIC HEATER
OPERATING INSTRUCTION
Caution
：
Make sure that the four screws which are used to fasten the Diaphragm pump are removed from the control system before
use. Otherwise serious damages may be caused to the user and the system.
1.
Place the desoldering iron gun in the holder separately. Then connect the plug to the receptacle on the station and turn
clockwise to tighten the plug nut. Check that the power supply is corresponding to the specification on the type plate and the
power switch is on the “OFF” position. Connect the control unit to the power supply and switch on the power. Then a self-test is
carried out in which all display elements are switched on briefly. The electronic system then switches on automatically to the set
temperature and displays this value.
2.
The display and temperature setting
The digital display:
①
shows the actual temperature of the desoldering tip .
②
shows the setting temperature: Pressing the “UP” or “DOWN” button
can switch the digital display to the set point display. The
set-point can be changed for ±1
℃
by tapping the “UP” or “DOWN” button.
Pressing the button will change the set-point quickly. The digital display
will return automatically to the actual value and the iron will reach to the
setting temperature quickly.
③℃
/
℉
display: Switching the temperature display from
℃
to
℉
by
pressing the “
℃
/
℉
”button and then the electronic system will display the
actual temperature
①
and setting temperature
②
in
℉
, and vice versa.
④
When the actual temperature on the soldering tip is less than the
set-point, “HEAT ON” will display and make the desoldering tip heating
up.
⑤
When the absolute offset is more than ±10
℃
between the actual
temperature and the set-point on the soldering tip or the nozzle, “WAIT”
will display. It means that the temperature electronic control system is
not in the stable situation, we should wait a moment to let the “WAIT”
disappear.
⑥
When “ERROR” display, there may be a trouble on the system, or the
soldering iron is not connected to the control system correctly.