Ÿ
TURN OFF ALL POWER TO EXISTING EQUIPMENT AT THE BREAKER SWITCH.
Ÿ
BEFORE STARTING INSTALLATION, YOU MUST READ THIS MANUAL IN ITS
ENTIRETY TO ASSURE A SAFE INSTALLATION.
INSTALLATION
A) Install the Precision into a 1⁸ ¹⁄ inch opening with a union on both sides to facilitate easy removal should it
become necessary. Unions are provided for easy servicing and removal.
B) Clean the ends of the PVC pipe and glue the manifold into opening in the horizontal position shown above.
C) If existing pipe is sized smaller or larger than 2 inch, use adapters to install manifold (not provided)
D) Water flow is automatically diverted into the UV chamber at the proper flow rates. Restriction to the
plumbing is nominal when the manifold is inserted into the plumbing and is comparable to adding a heater to
the pool. See below:
o
DO NOT ATTACH MANIFOLD DIRECTLY TO A 90 ELBOW. ALLOW AT LEAST 6 INCHES OF
STRAIGHT PIPE ON EACH SIDE.
Filter
Skimmer
Water
from
pool
Water
return
to pool
Heater
Manifold
Optional
Salt Cell
(not provided)
To Power
Source
Ÿ
1. PLUMBING:
Install manifold downstream of the heater and before chlorine tablet feeder. If space allows, install
manifold minimum two feet away from the heater to avoid possible safety shutdown of the system due to
hot water conditions in the chamber.
4
2 Ft.
Unions
(
provided
)
System On
(Flashing - No Flow)
Check Manual
or Our Website
www.solaxx.com
PRECISION
PRECISION
