6
INSTALLATION
Mounting the Power Supply
CAUTION:
FOLLOW ALL APPLICABLE BUILDING AND ELECTRICAL CODES
1.
Before making any electrical connections, mount the power
supply to a vertical surface. Since Precision is designed to turn on
only when the pump is running, locate this power supply within 8
feet of the source power for the pump. The Precision power
supply is wired to the same source power as the pump. See page
8 for electrical connections after mounting power supply.
2.
Mount the aluminum bracket first on a
vertical surface at a height of approximately five (5)
feet above the ground using the screws provided
with the spacers against wall to allow air flow behind
bracket. Level the bracket using the oval hole for a
clean installation.
Dotted lines show alternate mounting holes for
mounting on a post.
3.
Once bracket is secured, slide the power
supply down onto the bracket using slots on back of
the power supply. Push down onto bracket gently
until it hits the stops and is mounted securely in
place.
System On
(Flashing - No Flow)
Check Manual
or Our Website
www.solaxx.com
PRECISION
PRECISION
PRECISION
PRECISION
