Solax X3-Hybrid, Руководство пользователя

Страница: 12 / 37

Space Requirement Ø
Installation Installation
Mounting Steps Ø
Step 1: Screw the wall bracket on the wall
Tools required for installation.
1.1 Place the bracket on the wall and mark down the position of the 6 holes.
1.2 Drill holes with driller, make sure the holes are deep enough (at least 60mm) to
support the inverter.
1.3 Install the expansion tubes in the holes, and tighten them. Then install the wall
bracket with the expansion screws.
Installation tools : crimping pliers for binding post and RJ 45, screwdriver,
manual wrench and
Step 1
Step 2
Overview of Mounting
Step 2: Place the inverter on the wall mounted bracket by holding the handle on
the side.
20 21
Step 4
Step 3: Screw the set screw on the right-top of inverter tightly.
Step 4: If necessary, costomer can install an anti-theft lock on the right-top of the
inverter.
300mm
300mm
300mm 300mm 500mm
Step 3
369 mm
2
6
0 m
m