Decommissioning
58
59
8 Decommissioning
8.1 Dismantling the Inverter
Disconnect the inverter from DC Input and AC output.
Wait for at least 5 minutes for de-energizing.
Disconnect communication and optional connection wirings.
Remove the inverter from the bracket.
Remove the bracket if necessary.
If possible, please pack the inverter with the original packaging.
If it is no longer available, you can also use an equivalent carton that
meets the following requirements.
Suitable for loads more than 30 kg.
With handle.
Can be fully closed.
Store the inverter in dry place where ambient temperatures are always
between -30°C - +60°C. Take care of the inverter during the storage and
transportation, keep less than 4 cartons in one stack.
8.2 Packaging
Disclaimer
9 Disclaimer
The X3-PRO G2 series inverters are transported, used and operated
under limited condition, such as environmental, electrical etc.
SolaX shall not be liable to provide the service, technical support
or compensation under conditions listed below, including but not
limited to:
Inverter is damaged or broken by force majeure (such as earthquake,
flooding, thunderstorm, lighting, fire hazard, volcanic eruption etc.).
Inverter's warranty is expired and doesn't buy extended warranty.
Can't provide the inverter's SN, warranty card or invoice.
Inverter is damaged by man-made cause.
Inverter is used or operated against any items in local policy.
Inverter's installation, configuration, commissioning doesn't follow
the requirements mentioned in this manual.
Inverter is installed, refitted or operated in improper ways mentioned
in this manual without authority from SolaX.
Inverter is installed, operated under improper environment or
electrical condition mentioned in this manual without authority
from SolaX.
Inverter is changed, updated or disassembled on hardware or
software without authority from SolaX .
Obtain the communication protocol from other illegal channels.
Build monitoring, control system without authority from SolaX.
SolaX will keep right to explain all the contents in this user manual.
When the inverter or other related components need to be disposed, have
it carried out according to local waste handling regulations. Please be sure
to deliver wasted inverters and packing materials to certain site where can
assist relevant department to dispose and recycle.
8.4 Waste Disposal
8.3 Storage and Transportation
