SolaX Power SK-BMU1300, Руководство пользователя

Страница: 23 / 60

6.5 Installation Steps
Step1: Screw The Wall Bracket on The Wall
• Use the wall brack et as a template to mark the position of the 4 holes.
• Drill holes with ф6 dr iller carefully, make sure the holes are deep enough
(at least 50mm) for install and tight the expansion tubes.
• Install the expansion tubes in the holes, and tight them . Install the wall bracket
using the expansion screws in the screw package.
Step2: Hang the X-hybrid Inverter On the Wall Bracket.
• Transportion of the inverter needs at least 2 people , each one needs to
use the handles at the sides of the inverter.
• Hang the inverter over the brack et, move the inverter close to it, slightly
laydown the inverter make sure the 4 mounting bars on the back of the
inverter is fixed well with the 4 grooves on the bracket.
Note : The installation of SK-BMU is the same as above.