Part No. 501414 Issue 9
1.9 Environmental
Operating Temperature Range A,B,K,L (types) *
-55 oC / +150 oC
Operating Temperature Range C,D,M,N (types) *
-55 oC / +200 oC
Storage Temperature Range A,B,K,L (types) *
-55 oC / +150 oC
Storage Temperature Range C,D,M,N (types) *
-55 oC / +200 oC
Conditions of high humidity and vibration should be
avoided.
1.10. Connectors
1.10.1. INTEGRAL:
Transducers can be fitted with a
six pin connector, or a connector kit can be supplied
for fitting by the Customer. This option is not available
for Transducers fitted with rod end bearings, or radial
lead outlet. It is recommended to ensure satisfactory
operation that this option is Factory fitted.
1.10.2. IN-LINE
: A five pin Din type connector can
be fitted to the lead, supplied loose or ordered sepa-
rately. If fitted to non-Solartron Metrology equipment,
careful observation of connections must be adhered
to as Solartron Metrology cannot be held responsible
for any damage which may result.
Figure 1 Examples of Clamping Methods
5
1.0: General
1.0: General
* An explanation of codes can be found on our ordering guide
502103 available from [email protected]
or www.solartronmetrology.com
Содержание MACH 1 Series
Страница 1: ......
