SolarMax 10094601 Скачать руководство пользователя страница 33

33

en

which becomes the property of SOLARMAX. Should the part or device to be exchanged 
not have been returned to SOLARMAX within two weeks of delivery of the part or 
replacement device, SOLARMAX will invoice the additional costs for the part or device 
supplied.
Free On-Site-Replacement: This contains material cost as well as labor and travel 
expenses of SOLARMAX staff or staff authorized by SOLARMAX, insofar as it was send 
to the operation site by SOLARMAX.
Further requirements MaxStorage:
The battery is considered defective if its remaining capacity is less than 80% of its 
nominal capacity.
SOLARMAX has the right to optimize the operation of the plant at any time in accord-
ance with the warranty, i.e. to qualitatively modify key data and functions for opera-
tion and life support and adjust system and battery performance or battery discharge 
depth to optimise battery life by remote maintenance and control means.
Further-reaching claims, especially claiming the replacement of direct and indirect 
damages, founded by the defect of the device or cost incurred by the implementation 
and removal or lost profit, are not covered by this guarantee.
2�  Assurance of Repair and Replacement 
SOLARMAX will provide repair material and replacement devices during the duration 
of guarantee in its discretion. If repair material or replacement devices for particular 
devices are not available anymore, the following applies:
SOLARMAX is authorized to install the device, which needs to be replaced, with a com-
parable device with an equivalent or higher performance. Necessary technical adjust-
ments of the replacement device for the installation of such a replacement device are 
covered by the guarantee for expenditure of time and material to the extent of up to 
10 % of the list price of the replacement device. Not covered by the guarantee are, if 
need be, a required replacement and a connection of peripheral devices as well as, if 
need be, required adjustments of surrounding devices of an inverter (such as supply 
cord, ventilation and safety devices).
SOLARMAX does its level best to minimize the extent of adjustment.
If there is no replacement material available at a reasonable expense, SOLARMAX is 
authorized to replace the defect device. In this case the above mentioned terms of 
replacement are applicable.
3�  Duration of Guarantee for Device Repair / Device Replacement
In case of repair or replacement of devices within the scope of the guarantee, the 
remaining duration of guarantee of the original device applies to the repaired / replaced 
device.
4�  Exclusion of Guarantee Services
Especially in following cases the guarantee claim is cancelled:

 

In the event of transport damage or external influences

 

In the event of interference, changes, repairs by non-SOLARMAX-authorized staff 
or on one’s own

 

In the event of inappropriate use, incorrect operation and installation

 

If a copy of the invoice for the purchase of the device is not submitted

 

If the type plate located on the device is unreadable

 

In the event of neglecting operating, installation and maintenance instructions 

Содержание 10094601





































Отзывы: