
Electrical connection
Installation manual
thermi
nator
II touch
31
opens with a display of the stored text. In addition,
the fault contact X29 is switched.
!
ATTENTION
- The connection must be poten-
tial-free.
7.5 Parameter reserve relay (X6)
230 V AC output; parameter can be found in the
Ser-
vice menu
| Button
External boiler/reserve relay
; three
options to choose from:
-
Boiler operation
: When the burner is active, the
output is switched, e.g. for a supply air flap in the
boiler room.
-
3-way motor valve
: for switching a 3-way motor
valve (if the third-party boiler does not load the
buffer tank); example: Depending on which boiler is
active (SOLARFOCUS boiler or third-party boiler),
the 3-way motor valve is switched between the
buffer charging circuit and the external boiler; see
Item 68408 -
External 3-way valve control
).
-
Supply to DFSH
: The automatic diverter for suction
heads (DFSH) is only supplied with power when
pellet suction is required.
7.6 Emergency OFF switch (X21)
An
emergency OFF switch
must be fitted outside the
boiler room. Observe regional building regulations.
Connect the cable to the power element
X21
.
7.7 Safety chain (X21)
Connect all safety-related devices (EMERGENCY
OFF switch, if necessary pressure sensor, etc.) in
series.
7.8 Cable management
For all thermi
nator
II boiler types.
Fig. 7-1_010
1 Electrical power element
2 Cable duct (behind the boiler cladding); availa-
ble on both boiler sides
3 Cable duct for live wires (pumps, mixers, mains
connection, etc.)
4 Cable duct for sensor cables
7.9 Electrical fusing
Slot on the pow-
er element
Use
Rating
F1
Mains fuse
T 10 A
F2
TRIAC fuse
FF 10 A
F3
Rectifier fuse
FF 2A
7.10 Internet connection
To connect the boiler control with the Internet, connect
the Ethernet port IF3 (type RJ45) on the bottom of the
display with a network router via cable.
The connection is required in order to use the following
functions:
- mySOLARFOCUS app
- Weatherman function
- IP-VNC (Remote access to the boiler control)
- Sending e-mails
2
1
4
3
Содержание Therminator II
