SOLARFOCUS pellettop 35/45, Руководство по эксплуатации

Страница: 15 / 44

5 Use and operation
5.4.6 Qualified personnel menu
Fig. 2-16
1 Service menu > 15
2 IP VNC (for remote access) > 15
3 Sending emails > 16
4 mySOLARFOCUS-App > 27
5 Language selection > 17
6 Date and time > 17
5.4.6.1 Service menu
In the Service menu there are technical (factory pre-
defined) settings for an optimum combustion process
in the boiler. These can only be accessed by qualified
personnel (code input required).
5.4.6.2 IP VNC (for remote access)
The control unit eco
manager- touch
allows access to the
control unit screens from a PC or mobile device (e.g.
smartphone). This is effected via
VNC (Virtual Net-
work Computing) software. The control has an inte-
grated VNC server, while the
VNC Viewer , which is
available free of charge on the Internet, is required for
remote access.
A cable connection is required on site for the connec-
tion of the control unit to the router. Use the Ethernet
socket (type RJ45) on the rear of the control panel
(Touch display).
i
Installation and configuration of this function
must be performed by the customer (i.e. not
included in the commissioning, service and sup-
port activities).
The following points are helpful for setting up a PC/-
router to control the VNC server, which requires know-
ledge of networking technology.
IP configuration
►
To access the IP-VNC icon, select it in the control
– Selection menu screen
– Customer menu screen
– Trained qualified personnel button
► Enter the data for your router. Recommend pro-
cess:
– Select DHCP ON .
Ä The IP address is determined.
–
Select the DHCP OFF + Apply button .
Fig. 2-17
– The IP address must be unique in each Ethernet
network and is dependent on the other network
components (PC, modem/router, etc.).
–
Recommendation: Set a fixed IP address (= DHCP
OFF ), i.e. the control unit has a constant IP
address.
Version 1: Installation of VNC viewer for access
from a local PC (PC in the home network)
► Download the free VNC Viewer from the Internet,
install it on the PC and start the application.
►
Enter the previously defined IP address of the con-
trol.
– As soon as the VNC Viewer is able to access
the control unit, a password must be entered.
–
The password predefined by the manufacturer
is
solarfocus
–
After login, the screen view of the control unit is
available.
Operation manual pellettop 15