5 Use and operation
Changing the VNC password
Fig. 2-18
►
Press the
Change VNC password
button on the
IP setup
view.
►
To change it, first enter the old password, then the
new password, then press the
Accept
button.
►
The new password must be used to log on after
restarting the VNC Viewer on the local PC.
►
Press the
Reset password
button to reset the
password to the default password
solarfocus
.
Version 2: Installation of VNC viewer for access
from an external PC (PC outside the home net-
work)
–
The user's local router does not always have the
same IP address on the Internet (it is allocated by
an
Internet Service Provider – ISP
).
–
Nevertheless, Dynamic Domain Name Systems,
also referred to as
DynDNS
or
DDNS
, allows
access to the router.
–
These systems allow a unique host name to be
assigned on the Internet; the unique name is then
also entered in the router. If the router is then assi-
gned a different address by the ISP, it enters the
updated IP address as the defined host name on
the DynDNS server. The router and therefore the
home network can then be reached using this host
name.
–
To create a connection with the control unit, a
port
diversion
is required from the external port of the
router
[1]
to the IP address and to VNC port 5900 of
the control unit.
[1] Port 5950 is recommended
i
Avoid
any
port forwarding
from external port
5900 of the router to IP address and VNC port
5900 of the control.
5.4.6.3 Sending e-mails
Function: The boiler control
eco
manager-
touch
auto-
matically sends status e-mails and alarm e-mails (to
stored addresses) if required.
Status e-Mail
: An automatic e-mail (e.g. sent daily) pro-
vides information on the current boiler status.
Alarm email
: a message is sent when a fault occurs.
i
Installation and configuration of this function
must be performed by the customer (i.e. not
included in the commissioning, service and sup-
port activities).
Fig. 2-19
Outgoing mail server
1
Enter the access data for the e-mail server you use.
Fig. 2-20
Use SSL
: Select if the e-mail server uses a TLS/SSL
encryption protocol.
Address book
2
A maximum of 10 contacts can be added. If there are
several addresses for a contact, these should be
comma-separated.
Write e-mail
3
Used to manually send e-mails. The recipient’s
address can be selected from the address book using
To
and
CC
or manually entered in the recipient line.
16
Operation manual
pellettop
