12 mySOLARFOCUS app
12 mySOLARFOCUS app
Function: The
mySOLARFOCUS app
allows you to
use your smartphone to access specific control
eco
manager-
touch
functions:
–
Setting the room temperature and heating circuit
flow temperature, including heating times.
–
Hot water programs, with one-time hot water tank
loading.
–
Display of the solar yield of your solar power sys-
tem.
i
Installation and configuration of this function
must be performed by the customer (i.e. not
included in the commissioning, service and sup-
port activities).
12.1 Requirements for use
–
The software version of the control is ≥ V 15.080;
for
octo
plus
,
pellet
elegance
,
pellet
top
, Central con-
trol
eco
manager-
touch
.
–
The control must be connected to the internet.
–
Smartphone with Apple IOS 7.0 or Android OS 4.4
12.2 Connecting the control to the inter-
net
Create a connection between the router and the
boiler control panel (touch display)
Use the following socket (RJ45) on the rear of the dis-
play:
–
for the boilers octo
plus
, pellet
top
, and pellet
elegance
,
Central control
eco
manager-
touch
- with 7-inch display:
X2 Ethernet
- older version, with 5.7 inch display:
X4 Ethernet
IP configuration
►
To access the
IP-VNC
icon, select it in the control
–
Selection menu
screen
–
Customer menu
screen
–
Trained qualified personnel button
►
Enter the data for your router. Recommend pro-
cess:
–
Select
DHCP ON
.
Ä
The IP address is determined.
–
Select the
DHCP OFF + Apply button
.
Fig. 2-37
–
The IP address must be unique in each Ethernet
network and is dependent on the other network
components (PC, modem/router, etc.).
–
Recommendation: Set a fixed IP address (=
DHCP
OFF
), i.e. the control unit has a constant IP
address.
12.3 Register on the web server
The touch display must be registered on the
SOLARFOCUS Web server:
►
Press the app button
Fig. 2-38
►
Continue by pressing
Accept
Fig. 2-39
Operation manual
pellettop
27
