SolarEdge Cellular Plug-In, Руководство по установке

Страница: 13 / 23

5. Pass the antenna cable between the mounting bracket and the rear side of the
inverter or along the heatsink fins.
6. Open the communication gland at the bottom of the inverter.
Figure 9: Inverter communication glands
7. Remove the rubber seal from the gland and insert the cable through the gland body.
8. Insert the rubber seal with the cable into the gland body and reconnect the gland to
the inverter. Tighten the sealing gland.
9. Pull the excess cable into the inverter so that the cable can be connected to the
Cellular Plug-inZigBeeZigBee (see Installing the Plug-In in the Inverter on page 14).
Cellular Plug-in Installation Guide
12 Clipping the Antenna to the Inverter