Operation using the touchscreen
Solar-Log
1000
User Manual
47 of 131
Threshold
. The threshold values "On" and "Off" define the switch on
and switch off value depending on the current power surplus. If an
appliance is supposed to run permanently after switching on (e.g. a
washing machine), the "Off" threshold value must be set to "-9999".
The appliance is always switched off as soon as the switch off time
is reached (see below).
Latest switch on
. With the "latest switch on" function, a period of
time can be defined in which the appliance definitely switches on,
even if the "On" threshold value has not been attained (example:
The wash cycle should definitely be finished by evening and
therefore must start in time for this to happen). The exact switch on
point is redefined daily within the selected period of time via a
random generator so that the network load due to consumers
switching on at the same time is avoided.
Turn-on duration
. To prevent switches from being triggered
immediately when there is sunlight for only a short period, you can
specify a minimum length of time after which the appliance switches
on.
3
Tap the value to be set.
The virtual keypad is shown.
4
Enter the desired values and confirm the entry by pressing
OK
or
Cancel
to abort the entry.